Pumps
Does the PSP700 Premium 250w Submersible Pump have a flow switch?
It doesn’t have a flow switch but it does have a float switch
What is the maximum depth the PSP700 Premium 250w Submersible Pump will work to?
With a cable length of 10m, the submersion must be less than that distance.
Where can I find the warranty information for pumps?
You can find the warranty information on the relevant pumps' pages within our pricelist. This makes it convenient for you to access all the necessary details about the warranty for each specific pump model.
Would closing off the skimmer and taking the sand out of the pool via main drain cause a hairline fracture in the Hydro Air AV150 pump casing and causing the pump to start to leak?
Shutting the skimmer itself would typically not create enough pressure change or stress to crack a properly functioning pump body.
The 1.5" pipework doesn't fit my I-Flo Pump
There are 2 x PPF100 adapters in the kit which are designed to convert the 50mm union to a 1.5" connection, allowing the 1.5" pipework to fit your I-Flo Pump.
What can cause an AV200-2DN-S Pump to switch itself off after 5 minutes?
There are a few things that could cause this. There is a thermal overload built into the motor so essentially it's getting too hot.
What material are the parts that touch the fluid made of in an AV100-3DN-S Pump?
The components of the AV100-3DN-S Pump that come into contact with the fluid are made from the following materials:
I have an AG16-2DC Pump, is the motor rated for use with an inverter?
The AG16-2DC Pump is compatible with our Clever Pool Inverter.
What additional fixings are required for connecting the iFlo 500 Filter Pump Pack to an Elecro heater which has 1.5” connections?
The 6-way iFlo multiport is listed as 1.5" in the parts list so it should be fine without other parts/adaptors.
Does the AG8-2DC Hydro Air Pump have a salt water compatible seal?
The AG8-2DC Hydro Air Pump utilizes a ceramic seal that is compatible with salt water.
How many litres per hour run through the FFL-071 Freeflo Pump 0.75hp.
The FFL-071 Freeflo Pump with 0.75hp has a flow rate of 11 cubic meters or 11,000 litres per hour.
What is a suitable replacement pump for the endurance?
A suitable replacement for the Endurance pump could be the Argonaut pump.
I need to replace an Espa Silen M Pump what would you recommend?
If you're looking to replace an Espa Silen M Pump, an Argonaut could be a recommended option, but you would need to make some adjustments to the pipework to ensure a proper fit. This might require the assistance of a qualified technician or plumber to ensure that the installation is carried out correctly and meets all necessary requirements.
My Krystal Clear Pump has an airlock bleed, what is wrong?
An airlock in your Krystal Clear Pump could be caused by a number of issues. Here's what might be wrong:
I have an IFLO 500 Filter Pump and small particles can now be seen coming back through the Inlet Vents, why?
It seems like the issue with small particles coming back through the inlet vents of your IFLO 500 Filter Pump is likely related to a media problem. There are a few possibilities:
Is the IFlo Filter Pump Pack compatible with a Bowman 50kW Heat Exchanger?
Yes, the IFlo Filter Pump Pack can be compatible with a Bowman 50kW Heat Exchanger. The compatibility typically depends on the specific requirements of your setup, such as the flow rate and pool size. It would be wise to consult with a professional or refer to the specific product manuals to ensure that these products will work together efficiently in your particular application.
Will the Azur Three Flow Filter Pump Pack be suitable for a diving pool? Will it withstand the pressure?
For a diving pool that falls under commercial use (as opposed to a private individual's back garden for family and non-paying guests), the standards and recommendations differ.
Does the 0.75hp iFlo Pool Pump have the same pipe thread as 1.5hp iFlo Pool Pump?
The new pump doesn't align with the old unions without a slight modification.
Are your Argonaut pumps, particularly the AV250-3DN-2, are suitable for Inverter Drive control?
The AV250-3DN-2 model is suitable for use with digital inverter speed control devices, as it contains no internal circuitry that would hinder compatibility with a digital alternating current supply.
What is the start up current for an AV75 pump?
The startup current for the AV75 pool pump is likely to be between four and seven times its running current of 2.3 Amps.
