Power Pack
What are the warranty conditions for Power Pack Batteries?
Power Pack Batteries are not covered under any warranty.
Will the remote control for the Power Pack 100 remain functional if the main control panel is located in a plant room beneath the pool, encased within approximately 300mm of concrete?
It's challenging to provide a definitive answer due to the likely presence of steel reinforcing within the concrete
For the Power Pack 100, the optional remote switch is equipped with two buttons. How should one proceed to promptly stop the motor in case of an emergency?
After consulting with the supplier about the emergency stop function for the Power Pack 100
Is it possible to integrate my existing Power Pack, dating from 2000, with the latest model of the reel system?
If the existing Power Pack is a Slidelock model, it should be compatible with the current reel system.
Is it possible to detach the steering wheels from a reel system in order to accommodate the installation of a Power Pack?
Yes, to accommodate the Power Pack, both the steering wheel and the end boss must be unscrewed from the reel system.
Is a Power Pack compatible for use with a Slidelock system that is approximately 15 years old?
Fifteen years ago, the same extrusion was used on the tube as is currently employed.
My existing Power Pack, purchased in 2002 for a domestic reel system designed for a 7-meter wide pool, has ceased functioning. Is the current model of the Power Pack compatible with this setup?
In these circumstances, the current Power Pack system should be compatible with the older setup.
Can a Power Pack 100 Motor (model PRD90501) be used interchangeably with a Power Pack 100 that was installed in 2007?
As long as the older motor is a 7-wire model, it should be suitable. And typically, a Power Pack 100 from 2007 would be equipped with a 7-wire system.
Is the MOT604 Key Fob compatible with a Power Pack system that has been in operation for 20 years?
No, the MOT604 Key Fob is not compatible with a Power Pack system of that age. However, the latest control box features a built-in receiver and is compatible with all 7-wire motors.
I am in search of a suitable replacement for the Power Pack Control Box model PMC-55.
The PRD605CP is compatible with the motor of the PMC-55, though it should be noted that the control features differ slightly.
Why is our older Reel Easy Power Pack failing to stop at its preset limits?
The issue likely stems from either the tube disengaging from the timing collar, or a malfunction in the motor limits, such as a break or short circuit.
Can the PRD605RKS, a 3 Position Rotary Key Switch, be integrated with a unit that is 10 to 15 years old?
Yes, the PRD605RKS is compatible with the unit, although it may appear slightly different as it is sourced from a different supplier.
What is the estimated lifespan of a battery used in a Power Pack?
The lifespan of a Power Pack battery varies based on its maintenance.
Is it feasible to install motorized reels outdoors in conditions where temperatures can plummet to -20°C?
The reel system itself should withstand such conditions, but the cover may not be suitable for temperatures as low as -20°C.
Where can one purchase Micro switches for the Power Pack 100, and what specific requirements should be considered?
The required Micro switch for the Power Pack 100 is a standard V3 model, which can be sourced from RS Components.
What are the specifications, including the diameter, for the 15-meter cable used with the Power Pack?
The standard cable for the Power Pack is 0.75mm with a 2 x 7 configuration.
What warranty terms are provided for the PRD90501 - Power Pack Motor, 15-meter, 7-core wire?
The standard warranty period for the PRD90501 - Power Pack Motor is two years.
I am experiencing issues with the remote for the Power Pack 100. While activating the cover works consistently, its removal is intermittent, even though the control box indicates everything is functioning normally.
Try utilizing Option 3 to erase all transmitters, then reprogram the existing one (refer to the instruction leaflet for guidance). Additionally, it might be necessary to replace the batteries.
I recently purchased a Power Pack 100 but haven't connected it to the reel yet. Upon attempting a test run by switching it on, there was no response; none of the light indicators activated.
The new Power Pack 100 models are equipped with enclosed batteries that require charging.
I believe the reel system at my property is a post-1997 Plastica model, which was already installed when we moved in. Is the Power Pack 100 compatible with this type of reel system?
If the reel system's tube features four grooves running along its length, then we no longer provide adaptors that are compatible with this design. In such cases, new tubes and end boss assemblies will be required.
