Plastica Argonaut Pump 0.33hp 0.24kW Single Phase 5.8m³ per hour @ 9m head

Login to view prices
Availability : More than 20 in stock
Your best choice for small to medium sized pools, spas, ponds or other recirculation systems. Incorporating many technical features that ensure high performance, durability and reliability.

The Plastica Argonaut pump has been designed and engineered to succeed the rest. A superior build quality ensures performance durability and reliability.

The mechanical seal made with AISI 316 Stainless Steel is suitable for a wide range of applications including chlorine, bromine, iodine and even sea water.

All IP55 rated motors include a high grade Stainless Steel shaft, ranging from 0.33 Horse Power (0.24kW) to 2 Horse Power (1.5kW). The Argonaut truly is an exceptional choice for small to medium sized applications.


Mechanical seal

The seal fitted on the Argonaut pool pump is suitable for a wide range of applications including chlorine, bromine, iodine and sea water (if flushed through with fresh water on shut down).

Silent running

The Argonaut pump is extremely silent running and is therefore also recommendable for above-ground installation e.g. spas


The Argonaut pumps are TÜV approved according to European norms EN60335-1 and EN60335-2-41



  • Single phase model
  • BSP 2 3/4" thread
  • Clear PC tank cover and large strainer basket
  • Compact design
  • Ingress protection: IPx5
  • Maintenance friendly
  • PP tank, high chemical resistance
  • Self priming up to 3 m
  • Silent running
  • Stainless steel AISI 316 shaft

Technical Specifications

Power Type 1 Phase
Horse Power 0.33
Rating 0.24W
Head 9m (10m Max)
Flow Rate per hour 5.8m³
More Information
Re-stock dateIn stock
Warranty3 years pump body, 2 year motor, 1 year pump seal
Discount GroupO3
Pump hp0.33 hp
Pump RangePlastica Argonaut
Commodity Code8413810090
Country Of OriginUnited Kingdom
Customer Questions
What can cause an AV200-2DN-S Pump to switch itself off after 5 minutes?
There are a few things that could cause this. There is a thermal overload built into the motor so essentially it's getting too hot. 1. Is the pump in a suitably ventilated area? 2. Is there an obstruction in the pump or pipework? 3. Is...
What material are the parts that touch the fluid made of in an AV100-3DN-S Pump?
The components of the AV100-3DN-S Pump that come into contact with the fluid are made from the following materials: Pump body: Glass-filled polypropylene Impellers: Noryl Diffusers: ABS
Pool salts levels are around 6.8. is the AV150-2DN-S is suitable for this?
There will be no problem with using the AV150-2DN-S with salt levels around 6.8.
How to fix a Mechanical seal Fault on an Argonaut pump?
Here's a specific guide to fixing a mechanical seal fault on an Argonaut pump: Disconnect Power: Ensure the pump is switched off and disconnected from power. Remove the Four Bolts: Undo the four bolts connecting...
What is the thermal overload protection/thermistor used in the Argonaut Pumps Series?
The Argonaut Pumps Series motors are equipped with a basic thermal cut-out device integrated into the motor windings. This safety feature automatically switches to an open circuit if the temperature reaches a level that could cause harm to the system...
You must be logged in to submit a question