My pool is 5.7m x 3m x 1.3m deep, and the HeatSeeker will go at 12ft above the pool, what pump do I need?

For a pool that is approximately 4350 gallons, with dimensions of 5.7m x 3m x 1.3m deep, and with the HeatSeeker positioned 12ft above the pool level, a 2 or 4-hour turnover rate would be sufficient for a standard swimming pool setup (as opposed to a spa pool). To accommodate this configuration, a 0.5 hp pump would be suitable. It's also recommended to install a non-return valve as close to the pool as possible, to assist with priming the pump since it needs to lift water to a height of 12 feet. Once primed, the 0.5 hp pump should operate effectively.