Relax 2kg Stabiliser Conditioner - Box of 6
Availability : Low Stock Levels
SKU
RCH019
Relax 2kg Stabiliser Conditioner - Box of 6
Stabiliser – Conditioner is used to protect against chlorine loss by the suns UV rays. Pools should be dosed on their initial fill, after emptying and refilling, after heavy rainfall and after topping up. You should maintain the ideal level of cyanuric acid of between
30 – 50mg/l parts per million (ppm). High levels of cyanuric acid can cause cloudy water. Levels should be checked weekly.
This product is not classified as hazardous, but the following precautions should apply.
Wear protective gloves/protective clothing/eye protection/face protection.
IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do.
Continue rinsing. If eye irritation persists: Get medical advice/attention.
Dispose of contents/container to an authorised waste collection point
GENERAL PRECAUTIONS
Always read the label and product information before use.
Store in a cool dry place, out of the reach of children.
Handle products in a well-ventilated area, preferably outdoors.
Wash hands after use. Instructions and dosages given are a guide for the most effective use.
Wear protective gloves/protective clothing/eye protection/face protection.
IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do.
Continue rinsing. If eye irritation persists: Get medical advice/attention.
Dispose of contents/container to an authorised waste collection point
GENERAL PRECAUTIONS
Always read the label and product information before use.
Store in a cool dry place, out of the reach of children.
Handle products in a well-ventilated area, preferably outdoors.
Wash hands after use. Instructions and dosages given are a guide for the most effective use.
| SKU | RCH019 |
|---|---|
| Re-stock date | In stock |
| Manufacturer | Plastica |
| Hazardous | No |
| EAN | 5055672147886 |
| Discount Group | T |
| Lead Time (Days) | 0 |
| Pallet Qty | 30 Boxes |
Customer Questions
Water Stabiliser - Conditioner
DIRECTIONS FOR USE
- Adjust pH to 7.2.
- Add 10g per 1000 litres to increase the CA value by 10mg/l (e.g. 1500 litre spa freshly filled will need 45g to increase the CA value from 0 to 30mg/l) (e.g. 70,000 pool will need 2100g to increase CA levels from 0 to 30mg/l)
- Ensure that the circulation pump is running in the pool or spa, and it is not in use.
- Carefully pour the dissolved solution around the pool or spa to ensure an even distribution.
- After 30 minutes re-test, additional dosing may be required to achieve the optimum level of Cyanuric Acid 30-50mg/l (ppm).
Please note: Cyanuric Acid levels can only be reduced by dilution. Do not overdose.
| Litres of Water | Increase by 10mg/l | Increase by 50mg/l |
| 1,000 | 10g | 50g |
| 10,000 | 100g | 500g |
| 25,000 | 250g | 1250g |
| 40,000 | 400g | 2000g |
| 50,000 | 500g | 2500g |
