My Cart

2kg Own Label Granular Floc - Box of 6

Availability : Made to order in 1 working days
SKU
OLC054
6 x 2kg Own Label Granular Floc
6 x 2kg Own Label Granular Floc

Hazards Identification

Classification of the substance or mixture

  • Classification (REGULATION (EC) No 1272/2008) [CLP/GHS] : Skin Irrit. 2, H315, Eye Irrit. 2, H319, STOT SE 3, H335, Classification (67/548/EEC, 1999/45/EC), Xi; R36, Xi; R37, R38
GSH07 Warning Symbol
GSH07
Warning

Hazard Statements

  • Causes skin irritation
  • Causes serious eye irritation
  • May cause respiratory irritation

Precautionary Statements

  • Wash thoroughly after handling
  • IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
  • If eye irritation persists: Get medical advice/attention
  • Avoid breathing dust/fume/gas/mist/vapours/spray
  • IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
  • Call a POISON CENTER or doctor/physician if you feel unwell

Supplemental Hazard Information (EU)

  • NONE

Other Hazards

  • NONE

First Aid Measures

  • Contact with eyes
    • Rinse cautiously with water for several minutes
    • Remove contact lenses, if present and easy to do. Continue rinsing
  • Contact with skin
    • Wash with plenty of soap and water
  • Inhalation
    • Remove victim to fresh air and keep at rest in a position comfortable for breathing
  • Ingestion
    • Call a POISON CENTER or doctor/physician if you feel unwell
    • Give plenty of water to drink
    • Get medical advice/attention

Most important symptoms and effects, both acute and delayed


  • Causes irritation

Indication of immediate medical attention and special treatment needed

  • Treat symptomatically
More Information
SKUOLC054
Re-stock dateMade to order in 1 working days
ManufacturerPlastica
HazardousNo
Discount GroupT5
Lead Time (Days)1
Pallet Qty24 Boxes
Customer Questions
No Questions
You must be logged in to submit a question

Granular Floc

Directions for use

Method 1

  1. Adjust pH to 7.4
  2. Pre-dissolve 800gm per 45.5m3 (10,000 gals) in a plastic watering can.
  3. Disperse solution over the full pool surface and allow distribution.
  4. Switch off pool pump and allow settlement over a 12-hour period.
  5. Carefully vacuum to waste. Repeat steps 1 to 5 if necessary.

Method 2

  1. Adjust pH to 7.4.
  2. Make sure skimmer is free of other chemicals.
  3. Pre-dissolve at a rate of 100gm per 45.5m3 (10,000gals) in a plastic bucket.
  4. Slowly pour solution into the skimmer and allow the filtration to run continuously.
  5. Backwash after 12 hours. Repeat steps 1 to 5 if necessary.