500g Relax Spa pH Plus

Login to view prices
Availability : 1 working day leadtime
SKU
RSPA14S
pH Plus is used to increase the pH of your spa water
500g Relax Spa pH Plus
  • pH Plus is used to increase the pH of your spa water
  • Maintaining the correct pH in your spa water is essential. Failure to do so will result in bather discomfort and damage to your spa
  • Ideal conditions are between 7.2 and 7.6
  • Tes the pH of your spa water at least twice per week and before every use


Hazards Identification

Classification of the substance or mixture

  • Classification (REGULATION (EC) No 1272/2008) [CLP/GHS] : Eye Irrit. 2, H319, Classification (67/548/EEC, 1999/45/EC), Xi; R36
GSH07 Warning Symbol
GSH07

Hazard Statements

  • Causes serious eye damage

Precautionary Statements

  • Wash thoroughly after handling
  • Wear protective gloves/protective clothing/eye protection/face protection
  • IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
  • If eye irritation persists: Get medical advice/attention

Supplemental Hazard Information (EU)

  • NONE

Other Hazards

  • Mildly irritating to eyes

First Aid Measures

  • Contact with eyes
    • Rinse cautiously with water for several minutes
    • Remove contact lenses, if present and easy to do. Continue rinsing
  • Contact with skin
    • Wash with plenty of soap and water
  • Inhalation
    • Remove victim to fresh air and keep at rest in a position comfortable for breathing
  • Ingestion
    • Call a POISON CENTER or doctor/physician if you feel unwell
    • Give plenty of water to drink

Most important symptoms and effects, both acute and delayed


  • Can cause damage to the eyes
  • Causes irritation

Indication of immediate medical attention and special treatment needed

  • Treat symptomatically
More Information
SKURSPA14S
Re-stock date1 working day leadtime
ManufacturerPlastica
HazardousNo
EAN5055672114925
Discount GroupTS1
Lead Time (Days)1
Customer Questions
No Questions
You must be logged in to submit a question

pH Plus

Directions for use

  1. Test the pH of your pool or spa daily. The pH of your water should be maintained between 7.2 and 7.6.
  2. If you test kit reading indicates that the pH of your pool or spa is lower than 7.2 add pH Plus at a rate of 10gm per 1000 litres of water (e.g if your pool contains 7 litres of water add 70gm of pH Plus). One heaped teaspoon holds approximately 7gm of pH Plus.
  3. Pre-dissolve in a clean plastic bucket filled with water.
  4. Ensure that circulation system is running when adding pH Plus.
  5. Slowly pour solution into water immediately above pool or spa return inlet.
  6. Test pH daily and repeat dose until test reading indicates pH has been increased to 7.4,
  7. Never add product when the pool or spa is being used; do not allow pool or spa to be used for 30 minutes after adding pH plus.