Relax Pool Clear Tabs - Box of 12
Hazards Identification
Classification of the substance or mixture
- Classification (REGULATION (EC) No 1272/2008) [CLP/GHS] : Skin Irrit. 2, H315, Eye Irrit. 2, H319, STOT SE 3, H335, Classification (67/548/EEC, 1999/45/EC), Xi; R36, Xi; R37, R38
Hazard Statements
- Causes skin irritation
- Causes serious eye irritation
- May cause respiratory irritation
Precautionary Statements
- Wash thoroughly after handling
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
- If eye irritation persists: Get medical advice/attention
- Avoid breathing dust/fume/gas/mist/vapours/spray
- IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
- Call a POISON CENTER or doctor/physician if you feel unwell
Supplemental Hazard Information (EU)
- NONE
Other Hazards
- NONE
First Aid Measures
- Contact with eyes
- Rinse cautiously with water for several minutes
- Remove contact lenses, if present and easy to do. Continue rinsing
- Contact with skin
- Wash with plenty of soap and water
- Inhalation
- Remove victim to fresh air and keep at rest in a position comfortable for breathing
- Ingestion
- Rinse mouth
- Do NOT induce vomiting
- Get medical advice/attention
Most important symptoms and effects, both acute and delayed
- May cause irritation
Indication of immediate medical attention and special treatment needed
- Treat symptomatically
SKU | RCH055 |
---|---|
Re-stock date | In stock |
Manufacturer | Plastica |
Hazardous | No |
EAN | 5055672104681 |
Discount Group | T4 |
Lead Time (Days) | 0 |
Clear Tabs
DOSAGE RATE
One tablet per 60m3 (13000 gals) of pool water.
Two tablets per 60m3 (13000 gals) of pool water if water is very cloudy.
NOTE
Clear Tabs should not be used with cartridge or diatomaceous earth filters.
DIRECTIONS FOR USE
Increase chlorine residual to 5ppm. Maintain pH of the pool water between 7.2 to 7.6. Backwash the filter thoroughly. Add Clear Tabs to the skimmer basket. Leave the system running continuously for at least 48 hours and only backwash during this period if the pressure across the filter rises to the level recommended for backwashing. If backwashing is required during the 48-hour period then repeat the above operation. Add Clear Tabs after every backwash to maintain sparkling water.